rapsberry pi wifi dongle tplink setup
eskimo
- One minute read - 68 wordsPour faire fonctionner le wifi sur le pi avec le dongle tplink 875n :
Installer “wpa-supplicant”
apt-get install wpasupplicant
Télécharger le driver du dongle
https://github.com/lwfinger/rtl8188eu/raw/c83976d1dfb4793893158461430261562b3a5bf0/rtl8188eufw.bin -O /lib/firmware/rtlwifi/rtl8188eufw.bin
Editer le fichier de conf /etc/wpa_supplicant/wpa_supplican.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
ap_scan=1
network={
ssid="YourSSID"
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP
group=CCMP
psk="YourPSK"
}
Dans le fichier /etc/network/interfaces
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp
Puis reboot si ca ne fonctionne pas
Tous les commentaires
Aucun commentaire pour le moment.